How IT Decisions Impact Data Center Facilities: The Importance of Mutual Understanding

Ian Seaton from Upsite Technologies has provided this blog post about how IT decisions impact data centers as an educational resource for curious readers. Check it out below:

How IT Decisions Impact Data Center Facilities: The Importance of Mutual Understanding

Decisions and actions typically under the jurisdiction of the IT side of data center management can have a profound impact on the mechanical plant functions and resultant operating costs of the data center. By understanding these relationships, IT and facilities management should be able to form a more cooperative approach to managing the data center, resulting in a more effective and efficient operation, thereby better fulfilling often contradictory objectives.

Key considerations include:

• Specifying High ΔT Servers vs. Low ΔT Servers: Higher temperature rise (ΔT) means less airflow volume per kW for cooling. This results in a lower total conditioned airflow rate and less fan energy, reducing operating cost. Historically, blade systems have had higher ΔT’s than 1U-3U rack mount servers, though some newer Energy Star servers are closing that gap.
• Specifying A1, A2, A3, or A4 Servers: Different server classes operate at different maximum temperatures, resulting in more free cooling hours, significantly reducing operating cost.
• Specifying Equipment That Breathes from Front-to-Back: Not doing so violates hot and cold aisle segregation, resulting in the need for lower set points and higher air volume delivery, and therefore reduced total and redundant cooling capacity and higher operating costs.
• Specifying Solid State Storage or Tape Storage: Rate of temperature change maximums for tape storage may limit access to free cooling hours in some climate zones.
• Specify Cooling Unit Set Point: Best practice is to specify maximum allowable IT equipment inlet temperature and let mechanical plant find its own level.
• Specify Cages that are Compatible with Containment: If not properly done, there will be a need for extra volume airflow and lower cooling unit set points, resulting in higher operating costs.
• Employ Airflow Management Best Practices: Adhering to airflow management best practices can reduce required airflow volume and allow you to increase cooling unit set points, lowering energy fan costs, lowering chiller fan costs, and increasing free cooling hours.

The end goal in discussing these considerations is to have an agreement between IT and facilities as to how these decisions impact the other. To ensure efficiency and optimize the data center, both teams need to work together and understand the impact that the aforementioned considerations will ultimately have on the data center environment.

Continue Reading Here >>

Contact your local Accu-Tech Representative to learn more about Upsite Technologies solutions, or visit their vendor page here.